Kết quả 1 đến 1 của 1
  1. #1
    Excutive Administrator ThanhHaMobile™'s Avatar
    Ngày Tham Gia
    Feb 2007
    Đến từ
    Thành Phố Cảng
    Tuổi
    51
    Bài Gửi
    4,315
    Cảm Ơn
    865
    Được cảm ơn 9,777 lần
    trong tổng số 1,378 bài viết

    Arrow Hướng dẫn flash phone SE PDA SEMC bằng SEtool Box!

    First, basics.

    SEMC created few types of PDA:

    db200x+nexperia
    m600,w950,w960,p1,p990

    such phones have two security type - NEW and OLD.
    Identify button will show security type - it will write "NEW SECURITY detected" with NEW security phones.

    if is better to install PDA phone drivers and PDA flash drivers before any operation.

    Phone drivers:

    Code:
    for that you need to download phones.rar from support or from >>> SEMC
    turn on phone. in "connections manager->usb" select "normal mode".
    now, attach cable. 
    windows will ask you for drivers, point it to corresponding folder within extracted phones.rar.
    you must have "semc xxx usb modem" and "semc xxx application port" if drivers correctly installed.
    now, turn phone off and detach it.
    Flash drivers:

    Code:
    power on smartphone in fw update mode.
    
    - for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
    - for w950,w960,p1 press and hold "C" on TURNED OFF phone, then attach dcu60.
    
    windows will ask you for a drivers. drivers in %setool2 dist%\drivers\Smartphone_Drivers
    S1 OPEN
    satio,vivaz,vivaz pro

    S1 ANDROID,QUALCOMM BASED
    x10,x10mini,x10mini pro


    ------------------------------------------------------------------------

    FLASHING OF A1-BASED PDA PHONES

    download needed firmware package.
    add it to firmware area on PDA tab.
    DO NOT UNZIP PACKAGE, JUST ADD IT AS IS.
    on settings,check "signed mode"
    press flash

    note, if phone have BROWN domain, you must FIRST flash conversion packs:

    Code:
    for m600,w950,p990: 
    for brown cid 36: pda_ccpu_convert_red49_signed_brown36.zip
    for brown cid 49: pda_ccpu_convert_red49_signed_brown49.zip
    for w960,p1:
    for brown cid 49: pda_ccpu_convert_red53_signed_brown49.zip
    --------------------------------------------------------------------

    UNLOCKING OF A1-BASED PDA PHONES

    if you want to UNLOCK NEW SECURITY phone -

    check "use server" and enter your login/password.
    please check FAQ article about credit consumptions for your phone.

    press unlock button and insert cable to phone,while holding appropriate key on phone.
    follow program directions.

    if you want to UNLOCK OLD SECURITY phone -

    UNCHECK "use server".
    BE SURE you have latest REST files.

    now, you need install drivers for flashing.
    for that, poweron smartphone in fw update mode.

    - for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
    - for w950 press and hold "C" on TURNED OFF phone, then attach dcu60.

    windows will ask you for a drivers. drivers in %setool2 dist%\drivers\Smartphone_Drivers

    now, when all preparations finished - press unlock button and insert cable to phone,while holding appropriate key on phone.
    follow program directions.

    ------------------------------------------------------------------------

    FLASHING OF S1-OPEN PDA PHONES (Satio,Vivaz,Vivaz pro)

    download needed firmware package.
    add it to firmware area on PDA tab.
    DO NOT UNZIP PACKAGE, JUST ADD IT AS IS.
    on settings,check "signed mode"
    press flash

    connect turned off phone while holding "green" button.

    FLASHING OF S1-ANDROID PDA PHONES (x10,x10 mini,x10 mini pro,etc)

    download needed firmware package.
    add it to firmware area on PDA tab.
    UNPACK PACKAGE, ADD *.file_set to firmware area
    on settings,check "signed mode"
    press flash

    connect turned off phone while holding "BACK" button.

    -------------------------------------------------------------------

    UNLOCKING OF S1-OPEN PDA PHONES

    select USB as interface. that is REQUIRED.
    select phone model
    settings - check ONLY "signed mode (using server)", "do full unlock instead of usercode reset", fill your login details.

    back to original tab, press unlock, "GREEN BUTTON"

    if signature is calculated - you will receive 'SUCCESS' response, otherwise you will receive error code.
    if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.

    next, backup will be created so you will be able to restore phone if something will go wrong.

    procedure will continue,phone will be switched off and unlocked.

    remember, if something will go wrong - you have a backup of security units.

    please check "credits consumption" FAQ post for info about number of credits.

    UNLOCKING OF S1-ANDROID PDA PHONES

    select USB as interface. that is REQUIRED.
    select phone model
    settings - check ONLY "signed mode (using server)", "do full unlock instead of usercode reset", fill your login details.

    back to original tab, press unlock, hold "BACK BUTTON" and insert cable to powered off phone.

    if signature is calculated - you will receive 'SUCCESS' response, otherwise you will receive error code.
    if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.

    next, backup will be created so you will be able to restore phone if something will go wrong.

    procedure will continue,phone will be switched off and unlocked.

    remember, if something will go wrong - you have a backup of security units.

    please check "credits consumption" FAQ post for info about number of credits.

    please note, that network unlock for S1-ANDROID PDA is not availabe for public at the moment


    GESTURE LOCK RESET OF S1-ANDROID PDA PHONES

    check signed mode only, press unlock.
    hold "BACK BUTTON" and insert cable to powered off phone.

    ----------------------------------------------------------------

    POSSIBLE PROBLEMS

    DB200X+NEXPERIA

    damaged SCRC (imei mismatch), damaged seczone, damaged gdfs

    1. go to emptyboard tab
    2. select model
    3. on settings, check "signed mode", fill login details
    4. press reset, connect phone
    5. if gdfs structure okay, skip that step, otherwise add to firmware are gdfs in ssw format: one of

    DB2001_G700_GDFS_IN_SSW_FORMAT.SSW
    DB2001_M600_GDFS_IN_SSW_FORMAT.ssw
    DB2001_P1_GDFS_IN_SSW_FORMAT.ssw
    DB2001_P990_GDFS_IN_SSW_FORMAT.ssw
    6. add to firmware area correct EROM
    for m600,w950,p990: pda_ccpu_convert_red49_BROWN_CID49_DB2001.software
    for w960,p1da_ccpu_convert_red53_BROWN_CID49_DB2001.so ftware
    7. press flash
    8. reflash phone on usual PDA tab if needed.

    phone could not boot using dcu60, erom version timeout error,etc

    acpu erom damaged, to restore it


    1. select correct PDA model
    2. find corresponding EROM in dist\eroms\, add it to firmware area
    3. select correct com/ufs port
    4. press recovery
    5. connect turned off phone
    6. reflash phone via USB with normal firmware


    S1 OPEN

    phone could not boot and blinks red

    unlock phone using full signature unlock

    phone stuck on white screen

    reflash phone

    phone stuck on white screen, reflashing and unlocking not helps

    i will think something late



    Thanks Admin Support SEtool Forum.
    Warning: Chủ đề này đã cũ
    Cảnh Báo: Cảnh báo này cho biết chủ đề này đã gửi cách đây hơn 6 tháng , người gửi chủ đề đã giải quyết xong từ lâu hoặc có thể các giải pháp, chia sẻ cách làm đã cũ không còn phù hợp với hiện tại, link chia sẻ không còn hoạt động nên các bạn vui lòng cân nhắc trước khi trả lời chủ đề này, nhất là trong box KỸ THUẬT. Ví dụ như hình dưới sẽ cho biết các bạn biết thời gian gửi bài viết này:
    Nếu cần liên hệ, xin vui lòng ... theo thông tin ở dưới đây!


    CUNG CẤP THIẾT BỊ CHẠY PHẦN MỀM CHÍNH HÃNG
    • Unlock giải mã - mở mạng - mở mã pass người dùng - sửa lỗi phần mềm, nạp tiếng Việt, chuyển đổi ngôn ngữ cho các dòng máy Mobile • CUNG CẤP & TƯ VẤN SỬ DỤNG THIẾT BỊ CHẠY PHẦN MỀM MOBILE CHUYÊN DỤNG • CUNG CẤP SẢN PHẨM DUNG DỊCH PHÁ KEO IC, BÃO HÒA TẢN NHIỆT IC, KEO DẪN ĐIỆN, THIẾC BỘT, CHÌ XẢ MỐI HÀN, DAO PHÁ KEO •
    ThanhHaMobile™ Service Center
    Số: 411 Tô Hiệu (ngay ngã tư An Dương, đối diện siêu thị HONDA Hương Giang) - Hải Phòng.
    ĐT: Gphone 0313.609.239 - 0983.717.628 - 0912.050.858
    • Tài khoản Anypay Viettel số: 0987 250 552
    • Tài khoản giao dịch: DongAbank - Chủ tài khoản: Nguyễn Đức Thanh
      Mã số TK: 0104365048 chi nhánh Lê Chân - Hải Phòng.
    • Tài khoản giao dịch: Agribank (NNPTNT) - Chủ tài khoản: Ngô Thị Thu Hà
      Mã số TK: 2112205015281 chi nhánh Lê Chân - Hải Phòng.
    • Tài khoản giao dịch: VietCombank - Chủ tài khoản: Ngô Thị Thu Hà
      Mã số TK:
      0031001023873 chi nhánh Lê Chân - Hải Phòng.

    Buzz Yahoo: thanhhamobile2000


  2. ( ThanhHaMobile™ ) được 1 thành viên cảm ơn vì bài viết hữu ích!


Tạo thẻ tìm kiếm cho chủ đề này

Bookmarks

Quyền lợi khi viết bài

  • Bạn không thể gửi chủ đề mới
  • Bạn không thể gửi trả lời
  • Bạn không thể gửi file đính kèm
  • Bạn không thể chỉnh sửa bài viết của bạn
  •