PDA

View Full Version : Update UFS-MICRO HWK ZIN update here!



Đình Thảo
15-09-2008, 08:41
HWK Release 14/09/2008 - Discussion
Release Date: 14/09/2008

The Official release is ready in our download area http://sarunasoftware.com.


Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.0
----------------------

1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG_GSM V 2.0.8.0
-----------------

v 2.0.8.0 (HWK Required)
-------
1. Added "FSct0" (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)
2. KP130, KP210, KP215, KP260, KP265 support added.


SAMs V 2.0.8.0
---------------[/COLOR]

TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.


SeDBx v2.0.8.0
---------------

DB2010
1. Added Support for: 36Brown, 49Brown
DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.
DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.
PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.

USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver

SeDBx Quick Guide has been updated.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk

Hung_79hn
14-01-2009, 16:30
Release Date: 14/01/2009

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.0a
-----------------------

1. Flash Fix added to installer


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


SAMs V 2.0.8.1
---------------

TRIDENT
CC01,P258,U600G added (DUNL,IM,FL)
TRIDENT VISION
B220,B310,B320,B518,B520,B528,J600G,J610,J618,M318 ,M620,M628
added (CUNL,FL)
L320 added (DUNL,IM,FL)
(Use [Reset MMI] if phone ask for password)
OM(SYSOL)
B110 added (DUNL,IM,FL,SECT)
SWIFT
D618,D980,E2510,F250L,F268,F278,G600G,G618,J770,J8 08E,L258,M150,
M200,M3200,M3510,S3600,T429,U708E,U808E added(DUNL,IM,FL,SECT)
D780,D788,D880,D888,D980 SLAVE support added (DUNL,IM,SECT)
J150 fixed (DUNL,IM,SECT)
IM Rebuild added and RAW TFS Read fixed for these models:
D618,D780,D788,D880,D888,D900i,D908i,D980,E200,E20 8,E250,
E250D,E250V,E256,E258,E258D,E251,E251C,E480,E488,E 590,E598,
E740,E747,E830,E838,E2510,F110,F250,F250L,F258,F26 8,F278,G600,
G608,G808E,G618,J150,J210,J700,J708,J770,J808E,L25 8,L310,L600,
L608,M150,M200,M610,M618,M3200,M3510,P180,P260,S36 00,T429,U708E,
U808E,U908E (Need power up phone with battery after IM done !)
SWIFT-AEROFONE
B130,B130S,B130T added (DUNL,IM,FL,SECT)
SWIFT-3G
B2700,J800,L700,L708 introduced (DUNL,FL,SECT,BT)
SKYWORKS
C100 - 'Not Released Yet' bug fixed.
QUALCOMM
F480G,F480H,M7500,M8800,S7330,U900F,U900G,U900K added(FL,INF,REUL)
Added QualComm mode support:
(*#QUAUSB# to enter QualComm mode, QC Debug Interface on USB)
(*#SAMUSB# to enter Samsung mode, QC Debug Interface on RJ45)
QCDI Info, NVM Read, RAM Read added.
UNLOCK and UNFREEZE introduced for these models:
F480x,L760x,U900x,Z240 (Use [QCDI Info] button to readout keys)
COMMON
Stop button added.
User interface localisation.


Update Client V 2.0.8.1
----------------------

Fixed Exception errors on req-fbi process

!!!THERE IS NO NEED TO UPDATE YOUR HWK SINCE 2080 RELEASE IF ITS WORKING OK !!!


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.

thanks to hwk team

HT_GSM™
10-02-2009, 12:02
Release Date: 10/02/2009

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.2
----------------------

1. Flash Update Pack problems Fixed.
2. New BB5 products:
RM-247,RM-297,RM-333,RM-334,RM-335,RM-348,RM-349,RM-350,RM-356,
RM-398,RM-399,RM-415,RM-427,RM-428,RM-429,RM-437,RM-449,RM-450,
RM-472,RM-493,RM-494
(N96-1,N96-5,N85-1,N85-3,N85-5,N79-1,N79-3,N79-5,5800d-1,7510a,7510a-b,
6600s,5800,5800,3610a,E63-1,E63-2,E63-3,N96-3,E71-5,E66-5)
3. DC4 Flash Chip 0020883C Fixed.
4. New DCT4 products:
RH-111,RH-112,RH-113,RM-438,RM-439,RM-490,RM-500
(1202-2,1202-2b,7100s-2,7100s-2b,1680c-2b,2680s-2b)
5. New DCT4+ UNL versions support:
1200(RH-99 v5.71,v5.80) 1202(RH-112 v2.80) 1208(RH-105 v5.71,v5.80)
1650(RM-305 v5.71,v5.80)
6. User interface localisation.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG_GSM V 2.0.8.2
-----------------

1. Infineon GB100,GB105,GB106,KG285,KG288,KP100,KP105,KP106,KP 107
support added. (BIN bundle files open as FLS)
2. Read/Write for Infineon EGOLD Voice added.
3. Auto Backup for Infineon EGOLD Voice added.
4. ADI KF240, KF300
support added. (BIN bundle files open as Code)
Cable as for KP130,KP210,KP260
5. QualComm models introduced.


SAMs V 2.0.8.2
---------------

TRIDENT
B270 added (DUNL,IM,FL)
TRIDENT VISION
J610 MSL corrected (DUNL,IM)
E215L,M320L added (CUNL,FL)
(Use [Reset MMI] if phone ask for password)
OM(SYSOL)
M140 added (DUNL,IM,FL,SECT)
SWIFT
J706,L708E added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B130,B130S,B130T fixed flashing for HW 0.600
QUALCOMM
ENUMERATION NOT EXIST: 20 bug fixed (up to COM256 supported)
Fixed flashing for OEMSBL V5.32 and higher (M7500,M8800)
UNLOCK and UNFREEZE added for these models:
F480F,M7500(Armani),M8800(Pixon),U700,U700B,U708,U 800,U800F
(Use [QCDI Info] button to readout keys)
S7220,S7350 added.

Samsung / Qualcomm USB Drivers can be downloaded here:-
http://rapidshare.com/files/19063817...SB_Drivers.zip


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk

HT_GSM™
10-02-2009, 13:54
Do HWK chưa cho down nên up lên 4shared để các bạn tiện download :D

Load here (http://www.4shared.com/file/86926470/d123cf95/HWK_Suite_Minor_v0208002.html)

haichau123456
12-02-2009, 22:06
ko tìm thấy 2.08.2? mong bác giúp đở

ThanhHaMobile™
12-02-2009, 22:28
ko tìm thấy 2.08.2? mong bác giúp đở

Bạn có thể lấy file tại đây! :D

http://i118.photobucket.com/albums/o88/Thanhhamobile/Clikhe2.gif

HWK Ver 02.08.002. (http://thanhhamobile.blogspot.com/2009/02/cap-nhat-moi-cua-nha-cung-cap-chip-hwk.html)

Sorry quảng cáo xíu! :D

haichau123456
13-02-2009, 21:01
cảm ơn bác THANH HA nhiều . rất xin lỗi vì chưa đóng góp gì nhiều cho diễn đàn mình nhưng mình sẻ cố gắng

Raudua
15-02-2009, 21:15
em đang sài ver 02.08.00.em đả update lên ver 02.08.002 bây giờ bị lỏi em update lại ver củ củng k được nửa.bác nào đả gặp trường hợp nầy và sử oke rùi thì giúp em với.:crying:

Chance Bowman
15-02-2009, 21:36
Download 02.08.001 về, up từ 01 rồi lên 02, không thể up từ 00 lên 02.

Raudua
16-02-2009, 08:55
của em bây giờ update bản củ cung k được nửa anh ơi:hulam:

phucnguyen2112
16-03-2009, 14:52
cho mình hỏi UFS có chip mới update được hay UFS thường update được vậy

SyHung_QTri
16-03-2009, 14:57
ufs thường thì update làm gì bạn! có gắn chip mới update!

Raudua
21-03-2009, 22:55
Release Date: 21/03/2009

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


ATRz v2.0.8.3
-------------

1. Fixed clipboard issue on Vista.


UFS_DCTxBB5 v2.0.8.3
----------------------

1. New BB5 products: RM-495,RM-496 (5130c-2,5130c-2b)
2. New DCT4+ products: RH-121,RH-122 (1661-2b,1661-2)
3. New DCT4+ UNL versions support:
1202-2,1202-2b (RH-111,RH-112 v3.00, v3.10)
1661-2 (RH-122 v3.10)
2610,2610b (RH-86,RH-87 v7.11)
2680s-2,2680s-2b (RM-392,RM-393 v4.56, v4.91)
5000d-2,5000d-2b (RH-362,RH-363 v3.50, v3.54)
7070d-2 (RH-116 v6.20)
4. Simlock status detail info for DCT4 and BB5 models added.
5. Fixed clipboard issue on Vista.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG_GSM V 2.0.8.3
-----------------

1. BIN (TotalBin) files support added for ADI models.
(BIN bundle files open as Code)
2. ADI KP260, KP265 UNLOCK and REBUILD fixed.
3. ADI KP170, KP175 added, cable as for KP130,KP210,KP260
4. LGMDP NV2 format files support for QC NVM Write.
5. User interface localisation.
6. Fixed clipboard issue on Vista.


SAMs V 2.0.8.3
---------------

TRIDENT
C275L,C500L,C506,C510L,C516,E570L,U106 added (DUNL,IM,FL)
TRIDENT VISION
B520B,M310L added (CUNL,FL)
OM(SYSOL)
C145,C161,C168B,M140L added (DUNL,IM,FL,SECT)
SWIFT
C3610C,E200B,E230L,E251L,F270L,F275L,F480L,J700L,P 906,U900L
added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B130L,E1110(Euro and Asia),E1110C,E1117,E1117L
added (DUNL,IM,FL,SECT)
Increased flashing speed.
QUALCOMM
G400L,M8800B,V820L added.
UNLOCK and UNFREEZE added for these models:
G400,G400F,G400L,Z150
(Use [QCDI Info] button to readout keys)
COMMON
Fixed clipboard issue on Vista.


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.


Official SarasSoft Rapidshare Mirrors:-

http://sarunasoftware.com.

http://rapidshare.com/users/VAY6Q3

-co--co--co--co--co--co--co-

mt-mobile
22-03-2009, 00:52
update báo lổi anh ui ai up rùi chỉ em với

ThanhHaMobile™
22-03-2009, 01:09
How to login to HWK Support Area?

1. Uninstall old software, first HWK Suite Setup and then second HWK Support Suite..

2. Download and install HWK Support Suite. You can download the latest version from here:

HWK_Support_Suite_Setup_v02.08.000.exe (http://sarunasoftware.com/system/soft/HWK_Support_Suite_Setup_v02.08.000.exe)


3. Run Update Client. (If you have more than one HWK and want to use it on the same PC, you need to run the Update Client for that HWK also)

4. After successful update, press the support button in the Update Client.

5. Download HWK Suite Setup from HWK_SW and Install.


If you will ever need to login support area again, just press the support button located in the HWK modules.


If you will ever need to login support area again, just press the support button located in the HWK modules.


Làm thế nào để đăng nhập vào khu vực Hỗ trợ HWK?

1. Gỡ bỏ phần mềm cũ, HWK Suite cài lần đầu tiên và sau đó lần thứ hai HWK Suite .. và tiếp theo.

2. Tải về và cài đặt Hỗ trợ HWK Suite. Bạn có thể tải về phiên bản mới nhất từ đây:

http://i118.photobucket.com/albums/o88/Thanhhamobile/Clikhe2.gif

HWK_Support_Suite_Setup_v02.08.000.exe (http://sarunasoftware.com/system/soft/HWK_Support_Suite_Setup_v02.08.000.exe)

3. Cập nhật Khách hàng. (Nếu bạn có nhiều hơn một HWK và muốn sử dụng nó trên cùng một máy PC, bạn cần phải chạy Cập nhật Khách hàng cũng là của HWK)

4. Sau khi cập nhật thành công, bấm các nút hỗ trợ trong việc cập nhật Khách hàng.

5. Download HWK Suite HWK_SW từ các thiết lập và cài đặt.

Nếu bạn cần phải đăng nhập vào khu vực hỗ trợ một lần nữa, chỉ cần bấm nút Support nằm trong HWK module.

Raudua
22-03-2009, 08:55
update báo lổi anh ui ai up rùi chỉ em với

Nick nầy đang download bình thường mà bạn

http://rapidshare.com/users/VAY6Q3 )hun9(

mt-mobile
22-03-2009, 12:13
Nick nầy đang download bình thường mà bạn

http://rapidshare.com/users/VAY6Q3 )hun9(

em kêu update mà anh làm theo cach bác thanhha chỉ oki rùi :hug một lần nữa thank bác thanhha)hun9(

haitran
29-03-2009, 11:35
em update hwk thành công nhưng khi bật dao diện của nó lên nhấn vô conec thì nó báo lỗi BOX_AUTH ERRO:20????? em cài lại driver cũng vẫn báo thế tháo hết rà settup lại cũng vẫn vậy mòng anh em giúp vấn đề này

Hùng Phát Lộc
29-03-2009, 11:45
em update hwk thành công nhưng khi bật dao diện của nó lên nhấn vô conec thì nó báo lỗi BOX_AUTH ERRO:20????? em cài lại driver cũng vẫn báo thế tháo hết rà settup lại cũng vẫn vậy mòng anh em giúp vấn đề này

Trường hợp này phải cần có tool và FW chạy lại cho box, mình sẽ viết 1 bài hướng dẫn cụ thể cho anh em.

GSM Hải Phòng
29-03-2009, 11:47
Bạn lấy nó về mà sửa lỗi cho box nha


Hi! I just fix same problem with UFS by that way:
Setup HWK_Suite_Setup_v02.06.000 after updating got «Box_Auth_Error: 20»

1. Connect box, run UpdateClient.exe > Update UFS Firmware
open Req.fbi
UpdateClient ask open file –«*box number*.fbi»
Give*.* in next string and select Req.fbi
Got massage
-- UFSx Device: UFS2 SarasSoft, USB S/N: ****
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N :*****
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TORNADO
-- HWK ID : A1.04-******
-- HWK Status : 1, DL: 0
-- Request file generated: "box number.req"
Save one.
2.Start ufs3tools269b
Open in FBI Calculator "box number.req",calculate "box number.fbi".Save one too.Close ufs3tools269b.
Start UpdateClient.exe > Update UFS Firmware againe.Select "box number.fbi" and start update UFS Firmware.
Now my box is working.
Attached Files Req.rar (88 Bytes, 416 views)
ufs3tools269b.zip (23.8 KB, 542 views)

Hùng Phát Lộc
29-03-2009, 11:49
Bạn lấy nó về mà sửa lỗi cho box nha

Thank chú, đỡ mất công post bài.

SyHung_QTri
29-03-2009, 11:49
em update hwk thành công nhưng khi bật dao diện của nó lên nhấn vô conec thì nó báo lỗi BOX_AUTH ERRO:20????? em cài lại driver cũng vẫn báo thế tháo hết rà settup lại cũng vẫn vậy mòng anh em giúp vấn đề này

nếu nhẹ thì còn sữa được,nhưng nặng thì box die!

nếu box kô die sẽ sửa đựoc,anh nói mấy đứa mang lên em làm cho!100% sẽ hết!

cái đó kô liên quan gì đến driver!

DAIHUY™
07-04-2009, 17:46
HWK Release 06/04/2009 - Discussion
Release Date: 06/04/2009

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.4
----------------------

1. Added info about flashed Certificates for BB5.
2. Corrected DCT4+ unlock error messages.
3. Find Product settings by VPL files.
4. New BB5 product RM-458 (6208c)


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


SAMs V 2.0.8.4
---------------

TRIDENT
B100M added (DUNL,IM,FL)
TRIDENT VISION
B310R added (CUNL,FL)
SWIFT-AEROFONE
E1070,E1100T,E1125 added (DUNL,IM,FL)
QUALCOMM
Increased Comms speed on RJ45 interface.
UNLOCK and UNFREEZE added for these models:
L810,L811
(Use [QCDI Info] button to readout keys)


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.

http://rapidshare.com/files/21803945...v02.08.004.exe

DAIHUY™
11-04-2009, 09:32
11 april 09 hwk ini
following models added:
Rm-132 nokia n73-5
rm-412 nokia e75-1
rh-118 nokia 1681c/1682c
http://www.4shared.com/file/97858236...a/DctxBB5.html

VIETFONE™
08-06-2009, 08:26
HWK Release 08/06/2009
Release Date: 08/06/2009

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.5
----------------------

1. New BB5 products: RM-412,RM-413,RM-443,RM-505,RM-506,RM-507,RM-570
(E75-1,E75-2,6303c,N97-1,N97-5,N97-3,6600i-1)
2. Introducing RAPU-YAMA ASIC: RM-368,RM-431,RM-432,RM-470
(6260s-1,5630d-1,5630d-1b,6700c-1) support added.
3. New DCT4+ products: RH-512,RH-513,RH-514,RH-515,RH524,RH-525,RH-543
(2330c-2,2330c-2b,2320c-2,2320c-2b,5030c-2,5030c-2b,2323c-2)
4. New DCT4+ UNL versions support:
RH-99 v5.91, RH-100 v5.80, RH-105 v5.91, RH-106 v5.80, RM-305 v5.91
(1200, 1200b, 1208, 1208b, 1650)
5. Certificates write error in DL mode fixed.
6. Check is ASIC supported by firmware for DCT4 and WD2 products.
7. Read UEM IMEI or ESN for DCT-4/WD2 ASIC 2,5,6,11 when Rd UEM.
8. Added backup of PM 120 block when make Bk.308 (if exists)
9. Added [Skip Erase] option for BB5 products (for Experts Use Only)
10.Added [1331] option, to switch on/off NU48Fxxx Intel Chips Solution.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG GSM V 2.0.8.5
-----------------

1. MTK KG195,KP199,KP220 support added.
2. PCS files support added for MTK models.
3. Cable type indicator.


SAMs V 2.0.8.5
---------------

V 2.0.8.5
------
TRIDENT
B100K,C140i added (DUNL,IM,FL)
TRIDENT VISION
C3010,C3050,C3060R,C3110,C3110C,S3500 added (CUNL,IM,FL)
M120,M128,E1040,S3030 added (DUNL,IM,FL)
B520 Vodafone support added.
(use B520B-V model, not mix with B520, filenames are similar)
(Use [Reset MMI] if phone ask for password without SIM)
New MSL bypass algo introduced (B220,..,C3050,E1410,S3500...)
allows direct codes reading, unlock and IMEI repair.
MSL Repair introduced, allows to repair or use alien E2P
(Repair of "User Fault on Illegal Trial !!" and restore IMEI)
OM(SYSOL)
C160G added (DUNL,IM,FL,SECT)
SWIFT
B2100,C5212,E250i,F265L,F270,J700i,M158,P250,U800E ,X576
added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B100i,B210 added (DUNL,IM,FL,SECT)
C270,E1100,E1120,E1125W,E1125-SEA,E1210M,E1210S,E1310B,
E1310M,E1310S,E1360B,E1360M,E2100,E2210 added (DUNL,IM,FL)
(Do not mix B-C-M-L-S-T-EUR-SEA models! More info on support)
B130S,B130T flashing fixed (blinking or frozen phone)
(Must select target firmware as model, e.g. model is B130 and
want to flash B130S, select B130S as the model.)
SWIFT-3G
P270 added (DUNL,FL,SECT,BT)
QUALCOMM
A777,M7600,M7603,M8800C,M8800L,S5600,S5603,S8300N added.
[Write E2P] (NVM) added.
UNLOCK and UNFREEZE added for these models: A411,A777,S7220,
S7330,S8300,S8300C,Z230 (Use [QCDI Info] button to read keys)
Old models UNLOCK and UNFREEZE: Z300,Z500,..,ZM60,..
(these are not in models list, select any model. Use
[Mobile Info] button to read keys & [Unlock] to direct unlock)


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk


Official SarasSoft Rapidshare Mirrors:-

http://rapidshare.com/users/VAY6Q3
Report Post Reply With Quote

HT_GSM™
08-06-2009, 09:52
Thêm một link load ở 4shared nữa cho anh em dễ dàng download. :D

Download 4shared (http://www.4shared.com/file/110501214/fab7632d/HWK_Suite_Minor_v0208005.html)

dtducdong
13-06-2009, 09:44
nguyên bộ




HWK_Support_Suite_Setup_v02.08.000.exe
HWK_Setup_Suite_v02.08.000.exe
HWK_Suite_Minor_v02.08.001.exe
HWK_Suite_Minor_v02.08.002.exe
HWK_Suite_Minor_v02.08.003.exe
HWK_Suite_Minor_v02.08.004.exe
HWK_Suite_Minor_v02.08.005.exe




http://www.gsmfilehosting.com/1l3fg9diqf8y.html
http://www.gsmfilehosting.com/79tdmmejqd39.html
http://www.gsmfilehosting.com/n68q5b00vsfl.html
http://www.gsmfilehosting.com/btdub65uvskv.html
http://www.gsmfilehosting.com/9urr9nuegr44.html
http://www.gsmfilehosting.com/4vm5vz897ssd.html
http://www.gsmfilehosting.com/a2sovuwovgxh.html

LeVietDuc
18-08-2009, 18:22
Release Date: 18/08/2009

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.9.0, old client versions will no longer work.

You MUST be running HWK software 2.0.9.0 to access support.


UFS_DCTxBB5 v2.0.9.0
----------------------

1. New BB5 products: RM-424,RM-465,RM-469,RM-481,RM-482,RM-483,
RM-491,RM-504,RM-518,RM-547,RM-555,RM-561,RM-564,RM-566,RM-602
(6720c-1,5730s-1,E52-1,E52-2,E55-1,E55-2,6710s-1,5530c-2,3720c-2,
6730c-1VF,N97-4,2700c-2,6720c-1b,6730c-1,5800d)
2. New DCT4+ products: RM-519,RM-520 (2720a-2,2720a-2b)
3. New Samsung Flash Chip: 00EC2606 (K8S3215ETF)
4. Corrected VPL parsing for some models (N97)
5. Only NU48F256 left in [1331] option and moved to BB5 Tab.
6. SX4 bypass introduced using temporary NPC certificate erase.
7. [One Boot] option introduced (RAPx based One MCU products)
8. Enabled Files Multiselect, when Writing Certificates.
9. Erase Option for BB5 (for Experts Use Only !)


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG GSM V 2.0.9.0
-----------------

1. Unlock Codes Display for Infineon EGOLD Voice added
(Boot and See NCK Code for Instructions Press UNLOCK)


SAMs V 2.0.9.0
---------------

TRIDENT
T539 added (DUNL,IM,FL)
TRIDENT VISION
Fixed MSL algorithm for some models (C3050,...)
SWIFT
D606,D900E,E260,M2310,P220,S366,S5050,S5200 added(DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B270i,C276,C276L,E1070M,E1070T,E1075,E1075L,E1105T ,E2100B,
E2210B added (DUNL,IM,FL)
QUALCOMM
Manual Port Selection Added
(Use Refresh, After Each Phone Reboot or Reconnect)
(Untic QualComm Mode, Before Flashing)
F480R,i6210,U900W added.
UNLOCK and UNFREEZE added for these models:
A736,A737,F490,G800,G800L,M7600,S5600,U900W,Z400,Z 540


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.

ThanhHaMobile™
18-08-2009, 20:25
UFS_DCTxBB5 v2.0.9.0
----------------------

1. New BB5 products: RM-424,RM-465,RM-469,RM-481,RM-482,RM-483,
RM-491,RM-504,RM-518,RM-547,RM-555,RM-561,RM-564,RM-566,RM-602
(6720c-1,5730s-1,E52-1,E52-2,E55-1,E55-2,6710s-1,5530c-2,3720c-2,
6730c-1VF,N97-4,2700c-2,6720c-1b,6730c-1,5800d)
2. New DCT4+ products: RM-519,RM-520 (2720a-2,2720a-2b)
3. New Samsung Flash Chip: 00EC2606 (K8S3215ETF)
4. Corrected VPL parsing for some models (N97)
5. Only NU48F256 left in [1331] option and moved to BB5 Tab.
6. SX4 bypass introduced using temporary NPC certificate erase.
7. [One Boot] option introduced (RAPx based One MCU products)
8. Enabled Files Multiselect, when Writing Certificates.
9. Erase Option for BB5 (for Experts Use Only !)

Bản Update mới ra thấy giá trị nhất ở cái này: 6. SX4 bypass introduced using temporary NPC certificate erase., không biết là thế nào chờ xem mọi người test ra sao?

HWK lại trở mình lên hương, không biết còn gì mới tiếp theo nữa? (-)

Download Here:

http://i118.photobucket.com/albums/o88/Thanhhamobile/Clikhe2.gif

http://rapidshare.com/users/VAY6Q3 (http://rapidshare.com/users/VAY6Q3)

MrChương™
18-08-2009, 20:49
HWK đúng với tiêu chí:hàng ngon-bổ-rẻ :D.Anh chị em nào chưa tậu nó nên sắm nhanh không cái zụ sx4 by HWK mà ok thì chắc nó lại lên giá quá ;))

vietnham
18-08-2009, 21:47
sever đang quá tải các MOD down được úp lại lên cho anh em down với . chứ trang chủ không thể vào nổi à . thank all <zo><zo>

MrChương™
18-08-2009, 22:02
sever đang quá tải các MOD down được úp lại lên cho anh em down với . chứ trang chủ không thể vào nổi à . thank all <zo><zo>

Link ở bài viết của E-Admin ThanhHaMobile™ up lên rồi mà bạn.

caothanglc1
19-08-2009, 00:04
link mediafire



HWK_Support_Suite_Setup_v02.09.000.exe (http://www.mediafire.com/download.php?ijmqtzdmzkq)



HWK_Suite_Setup_v02.09.000.exe (http://www.mediafire.com/download.php?9negjz1lvxi)

huuson_0988
19-08-2009, 09:51
ai chưa dow được thì dow ở đây


HWK_Support_Suite_Setup_v0209000 (http://www.4shared.com/file/125873031/c36f0e4f/HWK_Support_Suite_Setup_v0209000.html)

HWK_Suite_Setup_v0209000 (http://www.4shared.com/file/125901607/d6d94335/HWK_Suite_Setup_v0209000.html)

caothanglc1
30-08-2009, 13:04
HWK v.02.09.000 Bản chuẩn dow từ support (-)

mới dowload sáng nay và up link Mediafire :D

đã test good

HWK_Support_Suite_Setup_v02.09.000.exe

http://www.mediafire.com/download.php?ltz0nnwm2o5

HWK_Suite_Setup_v02.09.000.exe

http://www.mediafire.com/download.php?exanimo2tg0

Raudua
31-08-2009, 22:18
UPDATE Dctxbb5 ini 31-08-09
Rm-518 nokia 3720c-2
rm-413 nokia e75-2
rm-449 nokia e63-2
rm-450 nokia nokia e63-3

http://i587.photobucket.com/albums/ss320/Raudua/Copyofcheckitfo6zg7.gif
Dctxbb5 ini 31-08-09 (http://www.mediafire.com/download.php?anjxmjn15je)

dtducdong
24-03-2010, 08:26
The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.

You MUST be running HWK software 2.0.10.0 to access support.


UFS_DCTxBB5 v2.0.10.0
-----------------------

1. New BB5 products:
RM-381,RM-455,RM-468,RM-492,RM-529,RM-530,RM-570,RM-573,RM578,RM-579,RM-584,RM-599,RM-600,RM-635
(6750-1,6350-1b,5730s-2,6790s-1b,E72-2,E72-1,3208c,6760s-1,2730c-1,2730c-1b,E72-5,6790s-1c,E63-5,2690)
2. New DCT4+ products: RM-590,RM-591 (2220s-2,2220s-2b)
3. More DCT4+ added for unlock (ASIC 3168) see corresponding list.
4. McuSw tag fixed in vpl parser.
5. Fixed time-out bug for some RAPU models.
6. [Det.Log] CheckBox now active, can auto create LOG file.
7. [Info] Shows Camera DCC settings and Status (for both Cameras)
8. [PM Edit] Revised: Read/Write DCC, Simlock Data, Parallel Model.
9. Increased PM read default margins, to have DCC in read PM for DCT4+
10.[Check Ask/Rpl] to Check Ask/Rpl files contents (Asic 2,5,6,7)
11.Fixed [Format] bug for new BB5 Symbian products.
12.ENO File flashing support (E63,E66,..,N97,..)
13.[Locks] for BB5 remade, now calculate codes for SLPA and SL20
14.[Check] Shows PASUBTOC SL related contents.

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG GSM V 2.0.10.0
------------------

1. MTK GB160,GB165,GB170,GB175,GB190,GB195,KG198 added.
2. Infineon GB101,GB109,GB110,GB125,GB130,KE858,KP108 added.
3. Infineon New Flash Chip SV7E3204UTA support.
4. ADI KG129,KG248,KG298 added.
5. " Cannot open file " Bug Fixed.

SAMs V 2.0.10.0
----------------

TRIDENT
C158,C158B,C188L,C240L,C258,C260B,C260L,C260M,C300 B,E576,E758,
X138,X180,X468P,X478,X568 added (DUNL,IM,FL)
USB flashing introduced for HPE models (U600,.. Approx. 2x faster)
TRIDENT VISION
B3210,B3310,B3313,C3010S,C3050C,C3053,C3060,C3110H ,M620N,
S3030C,S3500C,S3500H,S3500i,S3501C,S5150,S5150C added (CUNL,IM,FL)
MSL3 bypass introduced (B3210,B3310,B3313,C3060,C3060R,...)
USB UI functions introduced, allows to unlock USB only phones.
USB flashing introduced (Approx. 5x faster)
(Cannot use USB flashing of dead phones which have UL erased or damaged.
RJ45 flashing can be used to recover from erased UL situation)
SWIFT
A177,A226,A227,A237,A257,B3410,B5702,B5712C,B5722, B5722C,C3212,
C3510,C3518,C6112,C6112C,D980F,E200E,E208B,E250L,E 848i,F118,
F278,J150B,M2710,M2710C,M2710L,M3510C,S3100,S3110, S3110C,
S3600C,S3600H,S5200C,T219,T329,T729 added(UNL,IM,FL)
Added ENG flashing for DUOS FOTA models (D988,B5712C,..)
Auth. Boot and Firmware Sign. for Secure models (B5722,C3510,C6112,S3100)
B5702,D988,F265L,S5050 (SECT) bug fixed.
CSC Area format added.
SWIFT-AEROFONE
A137,CC01i,E1070C,E1100C,E1101C,E1107,E1113C,E1120 C,E1210,
E1310C,E1310E,E1360,E1360C,E1360S,E2100C,E2210C,E2 210H added (DUNL,IM,FL)
E1080,E1080C,E1080T,E1085,E1085L,E1085T,E1088C,E11 00H,E1150,
E1150C,E1160,E2120,E2120B,E2120C,E2130 added (CUNL,FL)
SWIFT-3G
C5110,C5130,C5130S,C5130U,J800R added (CUNL,FL,SECT,BT)
P270 (CUNL,SECT) bug fixed.
E2P Write is supported only for C5130,C5130S and C5130U.
QUALCOMM
A551,A561,A637,A746,A747,A766,A767,A811,A821,A827, A836,A837,
A867,C5220,C5510H,C5510U,G508,G508E,M7600B,M7600H, S5350,
S5600B,S5600L,S5608U,S5510,S7120U,S7350C,S7350E,S7 350F,
S7350H,S7350i,S7520U,S8300H,T469,T659,T749,T919,T9 29,U808 added.
Fixed flashing of non page size aligned files (rc1,rc2,ffs)
Added flashing support for QSC62xx models.
UNLOCK and UNFREEZE added for these models:
A551,A637,A767,A827,A837,C5220,F400,S5510,S7350,S7 350C,
S7350F,S7350i,T639,Z170,Z240E,Z360,Z720,ZV40
BROADCOM
QC Legacy BroadCom models introduced:
i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G,
S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C,
S7070 (CUNL,FL) To read codes use:
[Mobile Info] button using USB Cable (Phone Switched-ON)
and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)
QC Legacy BroadCom models Full Flashing (with BOOT Change)
[BOOT Repair] for QC Legacy BroadCom models added.
Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !
COMMON
Log to file added.
CLONE error message fixed.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk


Official SarasSoft Rapidshare Mirrors:-

http://rapidshare.com/users/VAY6Q3

daunguyenht
24-03-2010, 09:44
chào các pác! thấy các pác up mà thấy ham .cái của em up ngày này qua ngày khác cũng không được các pác ơi !đầu tiên em setup cái này hwk_support_suite_setup_v2.0.09.và next tới .grade log:
---------- HWK Update Client v 2.0.9.0 ----------
---------- HWK upgrade started:3/24/2010 8:31:13 AM ----------
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : 46662
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TORNADO
-- HWK ID : A1.04-PRO1-031765D2416000B0
-- HWK Status : 1, DL: 0
----------
Locating HWK Upgrade server...
HWK Upgrade server found!
Preparing connection to server...
Connecting to HWKUpgrade server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Error: Server returned unrecognized reply
:w:.tới đây mình cứ ngồi đó ngó .mặc dù khi trước cài setup v2.0.08 ok.nhưng giờ làm mãi chẳng được các pac ơi :hulam::hulam:!giờ có cái hwk mà ngồi nhìn nó thì chán thiệt!mình cũng coi nhìu bài về cách cài .nói đợi 24h.nhưng ngày nào mình cũng up nó .mãi chẳng dc !:hulam:!mỗi làn mình setup là mình xóa hết cái cũ đi nhưng làm mãi cũng not ok .pác nào chia sẽ em tí kinh nghiệm cài nó với !thank all(-))hun9(

GSM_SONGCONG™
24-03-2010, 15:32
HWK Release 23/03/2010

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.

You MUST be running HWK software 2.0.10.0 to access support.


UFS_DCTxBB5 v2.0.10.0
-----------------------

1. New BB5 products:
RM-381,RM-455,RM-468,RM-492,RM-529,RM-530,RM-570,RM-573,RM578,RM-579,RM-584,RM-599,RM-600,RM-635
(6750-1,6350-1b,5730s-2,6790s-1b,E72-2,E72-1,3208c,6760s-1,2730c-1,2730c-1b,E72-5,6790s-1c,E63-5,2690)
2. New DCT4+ products: RM-590,RM-591 (2220s-2,2220s-2b)
3. More DCT4+ added for unlock (ASIC 3168) see corresponding list.
4. McuSw tag fixed in vpl parser.
5. Fixed time-out bug for some RAPU models.
6. [Det.Log] CheckBox now active, can auto create LOG file.
7. [Info] Shows Camera DCC settings and Status (for both Cameras)
8. [PM Edit] Revised: Read/Write DCC, Simlock Data, Parallel Model.
9. Increased PM read default margins, to have DCC in read PM for DCT4+
10.[Check Ask/Rpl] to Check Ask/Rpl files contents (Asic 2,5,6,7)
11.Fixed [Format] bug for new BB5 Symbian products.
12.ENO File flashing support (E63,E66,..,N97,..)
13.[Locks] for BB5 remade, now calculate codes for SLPA and SL20
14.[Check] Shows PASUBTOC SL related contents.

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG GSM V 2.0.10.0
------------------

1. MTK GB160,GB165,GB170,GB175,GB190,GB195,KG198 added.
2. Infineon GB101,GB109,GB110,GB125,GB130,KE858,KP108 added.
3. Infineon New Flash Chip SV7E3204UTA support.
4. ADI KG129,KG248,KG298 added.
5. " Cannot open file " Bug Fixed.

SAMs V 2.0.10.0
----------------

TRIDENT
C158,C158B,C188L,C240L,C258,C260B,C260L,C260M,C300 B,E576,E758,
X138,X180,X468P,X478,X568 added (DUNL,IM,FL)
USB flashing introduced for HPE models (U600,.. Approx. 2x faster)
TRIDENT VISION
B3210,B3310,B3313,C3010S,C3050C,C3053,C3060,C3110H ,M620N,
S3030C,S3500C,S3500H,S3500i,S3501C,S5150,S5150C added (CUNL,IM,FL)
MSL3 bypass introduced (B3210,B3310,B3313,C3060,C3060R,...)
USB UI functions introduced, allows to unlock USB only phones.
USB flashing introduced (Approx. 5x faster)
(Cannot use USB flashing of dead phones which have UL erased or damaged.
RJ45 flashing can be used to recover from erased UL situation)
SWIFT
A177,A226,A227,A237,A257,B3410,B5702,B5712C,B5722, B5722C,C3212,
C3510,C3518,C6112,C6112C,D980F,E200E,E208B,E250L,E 848i,F118,
F278,J150B,M2710,M2710C,M2710L,M3510C,S3100,S3110, S3110C,
S3600C,S3600H,S5200C,T219,T329,T729 added(UNL,IM,FL)
Added ENG flashing for DUOS FOTA models (D988,B5712C,..)
Auth. Boot and Firmware Sign. for Secure models (B5722,C3510,C6112,S3100)
B5702,D988,F265L,S5050 (SECT) bug fixed.
CSC Area format added.
SWIFT-AEROFONE
A137,CC01i,E1070C,E1100C,E1101C,E1107,E1113C,E1120 C,E1210,
E1310C,E1310E,E1360,E1360C,E1360S,E2100C,E2210C,E2 210H added (DUNL,IM,FL)
E1080,E1080C,E1080T,E1085,E1085L,E1085T,E1088C,E11 00H,E1150,
E1150C,E1160,E2120,E2120B,E2120C,E2130 added (CUNL,FL)
SWIFT-3G
C5110,C5130,C5130S,C5130U,J800R added (CUNL,FL,SECT,BT)
P270 (CUNL,SECT) bug fixed.
E2P Write is supported only for C5130,C5130S and C5130U.
QUALCOMM
A551,A561,A637,A746,A747,A766,A767,A811,A821,A827, A836,A837,
A867,C5220,C5510H,C5510U,G508,G508E,M7600B,M7600H, S5350,
S5600B,S5600L,S5608U,S5510,S7120U,S7350C,S7350E,S7 350F,
S7350H,S7350i,S7520U,S8300H,T469,T659,T749,T919,T9 29,U808 added.
Fixed flashing of non page size aligned files (rc1,rc2,ffs)
Added flashing support for QSC62xx models.
UNLOCK and UNFREEZE added for these models:
A551,A637,A767,A827,A837,C5220,F400,S5510,S7350,S7 350C,
S7350F,S7350i,T639,Z170,Z240E,Z360,Z720,ZV40
BROADCOM
QC Legacy BroadCom models introduced:
i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G,
S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C,
S7070 (CUNL,FL) To read codes use:
[Mobile Info] button using USB Cable (Phone Switched-ON)
and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)
QC Legacy BroadCom models Full Flashing (with BOOT Change)
[BOOT Repair] for QC Legacy BroadCom models added.
Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !
COMMON
Log to file added.
CLONE error message fixed.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk


Official SarasSoft Rapidshare Mirrors:-
http://rapidshare.com/users/VAY6Q3

học sinh
24-03-2010, 17:27
bản 209 dùng file reg cho nhiều pc cũng ok còn bản 2010 info bản 2010 không dùng được file reg cho một pc khác,anh em ai chưa up mà sử dụng boox cho nhiều pc thì cứ bình tĩnh đã xem thế nào hãn up lên bản New

ThanhHaMobile™
24-03-2010, 21:23
bản 209 dùng file reg cho nhiều pc cũng ok còn bản 2010 info bản 2010 không dùng được file reg cho một pc khác,anh em ai chưa up mà sử dụng boox cho nhiều pc thì cứ bình tĩnh đã xem thế nào hãn up lên bản New

Bản update mới bảo mật cao hơn bản cũ rất nhiều vì vậy bà con nên tạo file REG để phòng khi PC lỗi, còn với việc chia sẻ sang PC khác thì không thể vì ver mới khi update xong trong các nhận dạng chíp lại thêm dòng "IV" nhận dạng chip để tăng cường bảo mật.

[down]


Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\SarasSoft\UFS3\xxxxxxx xxxxxxxxxxxxxx]
"IV"="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxx"
"ID"="Axxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx"
"IH"="xxxxxxxxxxxx"
"IM"="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"

Trum Spam
25-03-2010, 02:37
Bản update mới bảo mật cao hơn bản cũ rất nhiều vì vậy bà con nên tạo file REG để phòng khi PC lỗi, còn với việc chia sẻ sang PC khác thì không thể vì ver mới khi update xong trong các nhận dạng chíp lại thêm dòng "IV" nhận dạng chip để tăng cường bảo mật.

[down]

Xin đính chính thêm cùng Admin, em thấy ngoài cái "IV" đã thêm cho nhận dạng chíp nó còn thêm mục log của tool mỗi khi dùng hay sao ý! vì trong folder của hwk thấy thêm mục log data ghi chép lại toàn bộ quá trình khi khởi động tool lên dùng. Không biết cái vơ mới này có hữu hiệu không mà "bảo mật" ác ghê :D

LeVietDuc
25-03-2010, 13:11
HWK Release 24/03/2010
Release Date: 24/03/2010

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.10.1
-----------------------

1. RM-392,RM-393 (2680s-2,2680s-2b) v6.17 unlock bug fixed.
2. Box Init bug after BB5 flash fixed.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

huahaonam
05-04-2010, 13:08
Tất cả HWK New Update

http://rapidshare.com/users/VAY6Q3 download nhé các bạn]karaokeo[

ĐứcHồngMobile™
07-07-2010, 07:27
Release Date: 06/07/2010

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


LG GSM V 2.0.10.4
------------------

1. Infineon GB107,GB108,GB115,GS100,GS101,GS102,GS105,
GS106,GS107,GS108,KG289,KP109 added.


UFS_SAMs v2.0.10.4
--------------------

TRIDENT VISION
B3210M added.
Bug in E2P Filename Display fixed.
OM(SYSOL)
On the Fly E2P Patch added to keep Original IMEI number.
SWIFT
C3212i added(UNL,IM,FL)
On the Fly E2P Patch added to keep Original IMEI number.
SWIFT-AEROFONE
E1080i,E1086,E1086L,E1170,T139 added (CUNL,PUNL,PIM,FL)
On the Fly E2P Patch added to keep Original IMEI number.
On the Fly MCU Patch added to bypass MSL security for MSL3
(MSLC16) products (E1080,E1080i,E1086,E1150,E1160, ...)
after is possible Direct Unlock, Rebuild IMEI in normal way.
QUALCOMM
S3370,S5350M added (FL,CUNL,UNFR)
S5350 added (CUNL,UNFR)
Increased Speed in Communications (NVM Read/Write, RAM Read)
BROADCOM
B5310U added (FL)
i6230,S3653M added (CUNL,FL,BRP)
Combo Cable (USB+RJ45) Support added, not need Manipulations
with Cable when use [QCDI Info]
Corrected CSC,APP,PFS flashing for BCM2153 platform (B5310,..)
[Boot Change] Product will Restart after success Boot Change,
if Failed, will stay in Download Mode to Allow Retry.
[Full Download] will Write All without Restart after Boot Change.
COMMON
[Refresh] will Show Avalaible Ports List with Full Names.



Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk


Official SarasSoft Rapidshare Mirrors:-

http://rapidshare.com/users/VAY6Q3

MrChương™
10-08-2010, 08:30
HWK Release 09/08/2010

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_SAMs v2.0.10.5
--------------------


TRIDENT VISION
M2513 added (UNL,CUNL,IM,FL)
SWIFT
Added MCU_Id and Type Display.
Increased Preloader boot speed.
QUALCOMM
More Versions Support of Hidden Sysinfo models CUNL (S3370,..)
A877,M7600H,M8800H,S5603T,S7120H,S8300T added.
QUALCOMM+LSI
M8910,M8910B,M8910H,M8910U,S8000,S8000B,S8000C,S80 00H,S8000U,
S8003,S8500,S8500C added (FL)
BROADCOM
C3510T,M3710,S5560H added (FL)
S3650H,S5230C added (FL,CUNL,UNFR,BRP)
INFINEON
Infineon Platform Introduced, See on [Sky/INF] Tab.
E1151 added (CUNL,FL)
DHLT Engine will ask about additional DHLT tables generation.
COMMON
[Refresh] will Auto Select Ports, be sure that Right Model
and Mode is Selected (Untick [QualComm mode] when Flashing !)


Users who not want to wait few hours for 3rd DHLT table generation can download the files from our Official Rapidshare mirror. The files should be placed into x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT



Many thanks to all those who have supported us!!!

Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk


Official SarasSoft Rapidshare Mirrors:-

Link Dow (http://rapidshare.com/users/VAY6Q3)nload here!

P/s:Hwk update mỗi Sam mới buồn chứ! :lh=

BảoAnh_MoBiLe
11-08-2010, 08:56
FS_SAMs v2.0.10.5
--------------------

TRIDENT VISION
M2513 added (UNL,CUNL,IM,FL)
SWIFT
Added MCU_Id and Type Display.
Increased Preloader boot speed.
QUALCOMM
More Versions Support of Hidden Sysinfo models CUNL (S3370,..)
A877,M7600H,M8800H,S5603T,S7120H,S8300T added.
QUALCOMM+LSI
M8910,M8910B,M8910H,M8910U,S8000,S8000B,S8000C,S80 00H,S8000U,
S8003,S8500,S8500C added (FL)
BROADCOM
C3510T,M3710,S5560H added (FL)
S3650H,S5230C added (FL,CUNL,UNFR,BRP)
INFINEON
Infineon Platform Introduced, See on [Sky/INF] Tab.
E1151 added (CUNL,FL)
DHLT Engine will ask about additional DHLT tables generation.
COMMON
[Refresh] will Auto Select Ports, be sure that Right Model
and Mode is Selected (Untick [QualComm mode] when Flashing !)


Users who not want to wait few hours for 3rd DHLT table generation can download the files from our Official Rapidshare mirror. The files should be placed into x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT


Many thanks to all those who have supported us!!!


Odia.
http://www.sarasbox.co.uk
http://www.gsm-solutions.co.uk

http://rapidshare.com/users/VAY6Q3

sonkien04
11-08-2010, 11:28
toàn là sam sung . nokia trả có ji [tattai]

vanphumbile
05-10-2010, 00:45
em cài hwk báo login error mong các bác giúp đở

manh110983
05-10-2010, 07:19
em cài hwk báo login error mong các bác giúp đở

lập topic riêng đi bạn! cho cả cái hình nên nữa nhé!

Tu_mobile90
05-10-2010, 09:30
login error đăng nhập không thành công rồi anh ạ để 24 giờ sau update lại ok mà

ThanhHaMobile™
15-10-2010, 20:04
Release Date: 15/10/2010

The Official release is ready in our download area http://sarunasoftware.com (http://sarunasoftware.com/).


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


LG_GSM v 2.1.0.6 (HWK Required)
--------------------------------
1. Added NSCK,SPCK,CCK,SIM codes Display for GS10x


UFS_SAMs v2.0.10.6
--------------------

TRIDENT
X427 added (DUNL,IM,FL)
TRIDENT VISION
M2520 added (UNL,CUNL,IM,FL)
Display of USER LOCK Key for All Models.
SWIFT
E2550,E2550D,E2558 added (UNL,SECT,IM)
Notes:
1.Chinese Versions E2550Zxxx select as E2558 for UNL,SECT,IM.
2.E255x PRAM Flashing not Supported yet, use Original Flasher.
B3410C,E2510C,S5050C added (UNL,IM,FL)
Note: Chinese Versions B3410Zxxx select as B3410C.
SWIFT-AEROFONE
C3300D,C3300K,C3303,C3303K added (UNL,SECT,IM,FL) use 530Kom Cable.
E1107-DX,E1107L,E1117-MEA-IND,E1130,E1130B,E1150-MEA-SEA,E1153,
E1160-DX,E1220,E2120i,E2120L,E2121,E1252,E2121B,E2210T,E 2152,
E2370 added (CUNL,PUNL,PIM,FL)
Note: Mixing of DX MEA SEA Models causes Blinking or Dead Sets.
[Restart] Button now Exit TAT mode with Battery.
Auto Exit from TAT Mode when Flashing, not need
Cable or Battery Reconnect after UI functions (Info,IM,..)
SWIFT-3G
J808,S5550,S5550U added (CUNL,SECT,FL)
B7722,B7732 DUOS added (CUNL,SECT,FL) Flashing only Master Part.
C3630C,C3730C,S3930C TD-SCDMA added (FL) use 530Kom Cable.
QUALCOMM
A657,A887,A897,M7600L,S5530,T559 added.
BROADCOM
A697,B3410W added (FL,CUNL,UNFR,BRP)
S5250,S5253,S530,S5333 added (FL)
Boot Repair Enabled for All Broadcom models, use 530Kom Cable.
Some Models have encrypted Boot2.img and don't have uart_boot,
for these models use our released Boot_Repair packs.
Note: S562x with OneNand Flash Chip, Cannot be Repaired.
Added Unlock support(CUNL) for Hidden Sysinfo models (S5560,..)
if have no succes in SysInfo search, need ReFlash, to have untrashed FS
COMMON
Reduced/Full Log of TFS file list progress for OM/Swift.
Improved FileOpen dialog, to Override suggested path
to last used on same model.
Used Abbrevations List can be seen at the Bottom of this page.
DOCUMENTS
Samsung B7722 How to Rev.1
Samsung C3300_C3303 How to Rev.1
Samsung S523x Warning Rev.1
Samsung S7070 How to Rev.1
Samsung Swift-Aerofone MSL3 Models How to Rev.1


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)


Official SarasSoft Rapidshare Mirrors:-

http://rapidshare.com/users/VAY6Q3 (http://rapidshare.com/users/VAY6Q3)<!-- google_ad_section_end -->

TiênLãngGsm
26-10-2010, 18:14
Release Date: 26/10/2010

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_SAMs v2.0.10.7
--------------------

SWIFT-AEROFONE
E2152 FULL, _RD, E2P Write Bug Fixed.
Note: E2152 DX Firmwares cannot be Properly Flashed.
QUALCOMM
B2710,S3370E added.
QUALCOMM+LSI
S8000L added (FL)
BROADCOM
S5620B,S5628i added (FL)
COMMON
Used Abbrevations List can be seen at the Bottom of this page.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk


Official SarasSoft Rapidshare Mirrors:-

http://rapidshare.com/users/VAY6Q3

MrChương™
26-10-2010, 18:15
HWK Release 26/10/2010
Release Date: 26/10/2010


The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_SAMs v2.0.10.7
--------------------

SWIFT-AEROFONE
E2152 FULL, _RD, E2P Write Bug Fixed.
Note: E2152 DX Firmwares cannot be Properly Flashed.
QUALCOMM
B2710,S3370E added.
QUALCOMM+LSI
S8000L added (FL)
BROADCOM
S5620B,S5628i added (FL)
COMMON
Used Abbrevations List can be seen at the Bottom of this page.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk


Official SarasSoft Rapidshare Mirrors:-

http://rapidshare.com/users/VAY6Q3

manh110983
26-10-2010, 19:09
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

cái này nghĩa là gì vậy mod ơi!

chedo01
26-10-2010, 20:19
cái này nghĩa là gì vậy mod ơi!

Nó được dịch như ở dưới,bác đọc song hiểu đến đâu thì hiểu nhé

CẢNH BÁO!
Nếu HWK là một "TRIAL" hoặc bị ảnh hưởng bởi 3 công cụ bên, phần mềm này có thể không hoạt động đúng, do đó, sử dụng có nguy cơ của riêng bạn.

ThanhHaMobile™
23-05-2011, 04:19
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.2.0.0, old client versions will no longer work.

You MUST be running HWK software 2.2.0.0 to access support.


DCTxBB5 V 2.2.0.0
------------------
1. BB5 products: RM-576,RM-577 (6700s,6700s-1c) added.
2. Local RPL Service Fixed for ASIC 2,5,6,7,11 (UEM_PASW is Correct now)
Note: Need Confirm [Readout and Use UEM IMEI] when do [Rd UEM].
3. [Check Ask/Rpl] Renamed to [Calc Ask/Rpl] as can Calculate RPL now.
4. [Calc Ask/Rpl] Function will Generate Real RPL from ASK file (ASIC 2,5,6,7,11)
Note: When Reading UEM, do not Forget Set Right [UEM Changed] Status !
5. RSA Lock/Unlock for All DCT4+ products (not need Patch)
6. Life Timer added to [PM Edit]
7. DCT4 INFINEON Based Products USB Flashing / UI support added:
RH-111,RH-125,RH-126,RM-607,RM-608,RM-643,RM-644,RM-647,RM-653,
RM-669,RM-689,RM-704,RM-732,RM-733 (1202,1616-2,1616-2b,C1-01,C1-01.1,
C1-02,C1-02.1,1280,1800,1800b,C1-00,C2-00,X1-00,X1-00.1)
8. BB5 RAP3Gv40 Based Products USB Flashing / UI support added:
RM-509,RM-510,RM-511,RM-540,RM-598,RM-604,RM-615,RM-638,RM-721,RM-722
(3710a-1,3710a-1c,3711a-1,X3-00,7230-1c,7230-1,5330-1d,6303ci,C2-01,C2-01.5)
9. BB5 RAPU Based Products USB Flashing / UI support added:
RM-582,RM-596,RM-601,RM-609,RM-610,RM-627,RM-629,RM-632,RM-634,
RM-639,RM-640,RM-645,RM-648,RM-658,RM-659,RM-662,RM-675,RM-682,
RM-688,RM-691,RM-697,RM-699,RM-707,RM-718,RM-719,RM-720,RM-749
(Vertu CQ,N8-00,C6-01,E6-00,E6-00.1,X5-01,5230-1d,E5-00,E5-00.2,X3-02,C3-01,
C5-00.X5-01.2,E73,X7-00.1,C3-01m,C7-00,6702s,C5-00.1,C7-00b,C5-03,E5-00m,
X7-00,C6-01.3,C5-03.2,C5-04.1,C7-00s)
10.BB5 RAPIDO Based Products USB Flashing / UI support added:
RM-484,RM-485,RM-486,RM-551,RM-552,RM-559,RM-588,RM-593,RM-594,
RM-612,RM-624,RM-625,RM-684
(N86-1,N86-3,N86-5,X6-00.1,X6-00m,X6-00,5230-1,5230-1c,5230-1b,C6-00,
C6-00.1,5288,5250)
11.BB5 JUNO (BCM21351) Based Products USB Flashing / UI support added:
RM-497,RM-586,RM-614,RM-618,RM-709,RM717
(7020a-2,2710c-2,C3-00,X2-00,X2-01,X2-01.1)
12.Original SX4 Card Support Added (Use Any PCSC Compatible Card Reader)


LG_GSM v 2.2.0.0
-----------------
1. Infineon:
A110,A130,A133,A133GO,A170,A180,C100,C105,C300,C30 0GO,C305,
C310,GB220,GB220nGO,GB230,GB280,GD350,GD510,GD510N ,GM360,
GM360i,GM600,GS170,GS290,GS290GO,GS290N,GS390GO,GS 500,GS500g,
GS500gx,GS500v,GT350,GT350GO,GT350i,GT360,GT365,GU 220,GU230,
KC550,KC550d,KF510,KF510d,KF600,KF600d,KM380,KM380 c,KM380d,
KM385d,KM386c,KP500,KP500N,KP501,KP502,KP502GO,KP5 05,KP550,
KP570q,KS360,KS365,T300,T310,T310i,T310N,T315,T315 i,T320,
T320e,T320g,T325 added.
Notes:
1. To See Unlock Codes and Instructions, Press
2. To Flash Dead Phones, Tick [Emerg. Boot]
3. FLS and BIN files supported for Flashing.
2. USB Support for Infineon SGOLD3, SGOLDRADIO, XGOLD213.
Note: To use USB Select USB in [Baud] ComboBox.
3. ADI: G210,G220,G232,G233,G259,G262,G263,G610,G622,G632, G635,
G639,G660,G672,G677,C682,G688,G810,G822,G828,G912, GM200,GM205,
GM205GO,GM210,KF245,KG296,LG8930,MG235,MG295,MG296 added.
4. TI: C1300i,C2000,G850,L1400i,MG191a,MG191b,MG200c,MG20 0d added.
5. MTK: A120,A155,A160,A165,GB160a,GB160b,GB161,GB190a,GB2 70,
GS190,GS200,GS205 added.
6. BT Address Write Added for ADI, Infineon and MTK platforms.


SAMs V 2.2.0.0
---------------
TRIDENT
A127,i626,T719,X475 added (DUNL,IM,FL)
OM(SYSOL)
T209,T319 added (DUNL,IM,FL,SECT)
SWIFT
A436,A437,A516,A517,T229,T249,T339,T349-LTA-USA,T369,
T409,T619,T739 added (DUNL,IM,SECT,FL)
Added Multi Drive support for TFS Read.
Fixed SLAVE Boot Bug on some models (D980,D980F,D988)
TFS Extractor and TFS Builder added, Allows to Edit TFS files.
SWIFT-AEROFONE
Added [Patch MSL] Function to Patch without MCU Part Flashing.
C3300i,T109,T119 added (DUNL,IM,FL)
E1050,E1055G,E1055T,E1080F-IND-MEA-SEA,E1080W,
E1081T-EU-IND-MEA-SEA,E1083C,E1085F,E1085F-MEA,E1087T,E1105F,
E1150i,E1160i,E1170i,E1170T,E1172,E1175T-EU-IND,E1178,E1225F,
E1225T,E1225T-IND,E2121L added (PUNL,PIM,FL)
Notes:
1.Mixing of EU IND MEA SEA Files causes Blinking or Dead Sets.
2.E1081T EU E2P Image is not Compatible with IND, MEA or SEA.
3.For Cross Flashing Select Model Name Extension by File type.
4.Before Unlock, Info to see Codes or Rebuild IMEI use
[Patch MSL] Button or Flash with [Patch MSL] Option Enabled.
C3222,C3222W added (DUNL,CUNL)
Note: C3222 Flashing not Supported yet, use Original Flasher.
TFS Extractor and TFS Builder added, Allows to Edit TFS files.
SWIFT-3G
C5010E,E3210 added (CUNL,SECT,FL)
QUALCOMM
A597,A847,A927,B2710D,C5180,S5520,S5580,S6700T,S68 88,T359,T479,
T746,T749 added.
More Versions Support of Hidden Sysinfo models CUNL and UNFR:
A597,A706,A707,A717,A727,A847,A887,A897,A927,B2710 ,B2710D,S3370,
S5530,T359,T469,T479,T559,T659,T746,T749
QUALCOMM+LSI
S8500B,S8530 added (FL)
BROADCOM
S5230N added (FL,CUNL,UNFR,BRP)
S3850,S5260,S5263,S5330L,S5560i,S5750E,S5753E,S723 0B,S7230E,
S7230W,S7233E added (FL)
S5250,S5253,S5330,S5330L,S5333 Boot Repair (BRP)
[QCDI Info] Renamed to [BCMBL Info] for BroadCom Models.
INFINEON
B3310i,C3200,C3200G,C3200L,C3530,C3530L,E2230,E223 0M,E2232,
E2330,E2330B,E2330C,E2530,E2652,E2652W,S3310i,S335 0,S3353,
S3550,S3550C,S3550L added (CUNL,PUNL,PIM,FL,UFL)
Note: for USB Flashing select 'USB0' in [BaudRate] box.
E1151, Now Possible to Flash Read BIN Dump (Size: 007F0000)


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)


[B]DownLoad Tool Here (http://support.thanhhamobile.com/index.php?dir=Setup%20Box/NBOX%20-%20UFS%20-%20HWK/HWK_v_2.20/)

ĐứcHồngMobile™
05-07-2011, 11:19
Release Date: 04/07/2011

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

DCTxBB5 V 2.2.0.1
------------------
1. DCT4+ ASIC2 Unlock Bug Fixed
(RH-92,RH-93,RH-94,RH-95,RM-189,RM-190,RM-225)
2. Wrong Locks Status Indicator Fixed (RH-86,RH-87)
3. Detail Description Message on Bad VPL File Exception.
4. BB5 RAPU Based Products USB Flashing / UI support added:
RM-744,RM-745,RM-775 (C5-00.3,C5-00.2,X3-02.5)


LG_GSM v 2.2.0.1
-----------------
1. Infineon:
A100,A100a,A175,A175a,A175b,A180a,A180b,GB102GO,GB 105a,
GB107a,GB125a,GB126a,GS101a,GS101GO,GS107a,GS107b, GS117,
GS155,GS155a,GS155b,GS500f,GU200,GU200a,GU200b,KF5 10c,
KF600c,KF600d,KM570,KM570f,KP105a,KP106a,KP106b,KP 107a,
KP107b,T325g,TE350GO added.
2. ADI:
KP115a,KP130b,KP215a,KP260c,KP265d added.


UFS_SAMs V 2.2.0.1
--------------------
SWIFT
Some DUOS models Slave Boot bug Fixed.
SWIFT-AEROFONE
E1050,E1055T,E1080W,E1170i E2P Size Fixed.
Max Section Size Increased.
E1182 added (DUNL,PUNL,PIM,FL)
C3303i,C3322,C3500 added (CUNL,DUNL,IM,SECT,E2P)
Note:
C3322,C3500 TFS and CSC Flashing not Supported yet,
use Original Flasher.
SWIFT-3G
C5010B added (CUNL,SECT,FL)
QUALCOMM
A885,A886,F406,S3370B,S3370L added.
INFINEON
E2652,E2652W USB Flahing bug Fixed.
E2152i added (CUNL,PUNL,PIM,FL,UFL)
XGOLD213 BIF file Write bug fixed.
XGOLD213 Patch bug fixed.
BROADCOM
B5310R,C6712,S3853,S5250W added (UFL)
COMMON
Used Abbrevations List can be seen at the Bottom of this page.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk
(http://www.gsm-solutions.co.uk/)

Official SarasSoft Rapidshare Mirrors:-

http://www.4shared.com/file/cz-rGzgo/HWK_Suite_Minor_v0220001.html?

GSM_SONGCONG™
22-08-2011, 19:45
Release Date: 22/08/2011

The Official release is ready in our download area http://sarunasoftware.com (http://sarunasoftware.com/).


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


Since this is a minor update release, there is no need to update your HWK if you have already updated on the v2.2.0.0 release.


DCTxBB5 v2.2.0.2
-----------------

1. BB5 RAPU Based Products USB Flashing / UI support added:
RM-776 (C3-01.5)
2. DCT4 INFINEON Based Products USB Flashing / UI support added:
RM-692,RM-693,RM-702,RM-713 (C2-02,C2-02.1,C2-03,X1-01)


LG_GSM v2.2.0.2
-----------------

1. Infineon:
A108,A190,A190a,A190b,A210,A210b,GB125R,GC900fGO,G T350f,
KS360GO added.
2. EGV V3-32 and EGV V3-64 Direct Unlock and IMEI enable added.
Note: Use [Unlock] before IMEI rebuild.
3. EGV V3-64 new Flash Chips Support.


SAMs v2.2.0.2
--------------

TRIDENT VISION
<CODE CORRUPTED> for non 8 Digits PCK Fixed.
SWIFT-AEROFONE
E1050-CHN,E1050V,E1086i,E1150-CHN,E1155L,E1180,E1190,E1220i
added (PUNL,PIM,FL)
E1182L added (DUNL,PUNL,PIM,FL)
E1225T,E1182 TFS Flashing bug Fixed.
C3322 Unlock, IMEI, Sections bug Fixed.
B7722,B7732 Slave Part Flashing/Read/E2P added.
QUALCOMM
T669 Added.
INFINEON
C3011,C3560,C3750,C3752 added (CUNL,PUNL,PIM,FL,UFL)
E2232 Flashing bug Fixed.
<CODE CORRUPTED> for non 8 Digits PCK Fixed.

Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)


Official SarasSoft Mirrors:-

http://forum.gsmhosting.com/vbb/f311/hwk-install-files-mirrors-1216246/



Link loát cho anh em :
http://www.4shared.com/get/BQ38Ovfp/HWK_Suite_Minor_v0220002.html

XinhMOBILE
22-08-2011, 22:05
Cài bản mới như thế nào Mod hướng dẫn luôn hộ cái đi

GSM_SONGCONG™
22-08-2011, 22:12
Cài bản mới như thế nào Mod hướng dẫn luôn hộ cái đi

Cóp về giải nén và setup đè lên bản cũ là ok thui,nó chỉ là bản thêm một số mode thui chứ ko phải bản setup full nhé

hoangvugsm
01-09-2011, 12:00
các pác cho e hỏi cái này nha :
e cài Nbox _ hwk nhưng lúc cài bị báo lỗi như thế này : sarasSoft USFx driver packup ..... instad fail .....
bây h e phải làm sao đây các pro ...... các bác giúp e với ....... e rất cảm ơn

GSM_SONGCONG™
06-11-2011, 18:33
Release Date: 06/11/2011

The Official release is ready in our download area http://sarunasoftware.com (http://sarunasoftware.com/).


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


Since this is a minor update release, there is no need to update your HWK if you have already updated on the v2.2.0.0 release.


DCTxBB5 v2.2.0.3
-----------------

1. BB5 RAPU Based Products USB Flashing / UI support added:
RM-670,RM-679,RM-681V,RM-701,RM-730,RM-750,RM-763,RM-774,RM-779,
RM-781,RM-814,RM-815,RM-816
(700,T7-00,Vertu Con.T,600,702T,500,303,701,603,300,C5-08,C5-05,C5-06)
2. DCT4 INFINEON Based Products Flashing / UI support added:
RH-130,RH-131,RM-724,RM-725,RM-769 (100,100.1,C2-05,C2-05.1,101)
3. Vertu products names changed to RM-582V, RM-681V to keep compatibility
with DataPackageManager application.
4. New Flashloaders included.
5. Fixed BSOD bug on W7 x64 when Connect Box.


LG_GSM v2.2.0.3
-----------------

1. Infineon:
A190,A190a,A190b Read Lock Keys, Unlock, Dual IMEI Fixed.
2. Infineon EgoldVoice64_ULC2:
KG370,KG375,KG376,MG370a,MG370b added (FL,CUL,DUL,IM)
3. Infineon XMM2130: LG500G,LG800G added (FL)
4. Infineon XMM2150:
A200,A225,A230,A250,A255,A258,C330,T500,T505,T510, T515,
T530 added (FL,DUL)
S365 added (FL,CUL,DUL,IM)
Note: Use [Unlock] before IMEI rebuild.
5. Fixed BSOD bug on W7 x64 when Connect Box.


SAMs v2.2.0.3
--------------

SWIFT-AEROFONE
E1080T-SEA,E1175T-MEA,E1190-CHN,E1195,E1195-CHN,E1230
added (PUNL,PIM,FL)
E1055G info/unlock bug fixed.
xx-DX models renamed to xx-SEA (note: DD is IND not SEA)
E2222 (UNL,SECT,IM)
SWIFT-3G
(CUNL,SECT) fixed for C3630C,C3730C,S3930C
E3213K,i6320C,i6330C,S3710,S3770,S3778,S3830U,S561 0,
S5610K,S5630C added (CUNL,SECT,FL)
INFINEON
IMEI2 Rebuild added for DUOS models.
Minor bugs in AT protocol fixed:
(not read Codes and IMEI Rebuild fails on some models)
Notes:
Some S3550 units stucks on DFFS (CSC) Flashing,
Solution: Untick [Use EBL from FLS Pack] CheckBox.
COMMON
Fixed BSOD bug on W7 x64 when Connect Box.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)


Official SarasSoft Mirrors:-

★★ HWK Install Files Mirrors ★★ (http://forum.gsmhosting.com/vbb/f311/hwk-install-files-mirrors-1216246/)

PhuongNamMobile
06-11-2011, 21:41
HWK Core files - Install first Support Suite, Update your HWK, Install Setup Suite and any minors in correct order 1,2,3 ...

Filesonic - Rapidshare
Download HWK_Support_Suite_Setup_v02.20.000.exe (http://www.filesonic.com/file/1053888374/HWK_Support_Suite_Setup_v02.02.000.exe) - Download HWK_Support_Suite_Setup_v02.20.000.exe (https://rapidshare.com/files/3765512089/HWK_Support_Suite_Setup_v02.02.000.exe)
Download HWK_Suite_Setup_v02.20.000.exe (http://www.filesonic.com/file/1054757324/HWK_Major_Suite_v02.02.000.exe) - Download HWK_Suite_Setup_v02.20.000.exe (https://rapidshare.com/files/18030168/HWK_Major_Suite_v02.02.000.exe)
Download HWK_Suite_Minor_v02.20.001.exe (http://www.filesonic.com/file/1370049121/HWK_Suite_Minor_v02.20.001.exe) - Download HWK_Suite_Minor_v02.20.001.exe (https://rapidshare.com/files/518455707/HWK_Suite_Minor_v02.20.001.exe)
Download HWK_Suite_Minor_v02.20.002.exe (http://www.filesonic.com/file/1730312324/HWK_Suite_Minor_v02.20.002.exe) - Download HWK_Suite_Minor_v02.20.002.exe (https://rapidshare.com/files/2015242221/HWK_Suite_Minor_v02.20.002.exe)
Download HWK_Suite_Minor_v02.20.003.exe (http://www.filesonic.com/file/3102069275/HWK_Suite_Minor_v02.20.003.exe) - Download HWK_Suite_Minor_v02.20.003.exe (https://rapidshare.com/files/2322147488/HWK_Suite_Minor_v02.20.003.exe)


DHT1 & 2 - Extract to x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT

Filesonic - Rapidshare
Download _DHT.part01.rar (http://www.filesonic.com/file/127296791/_DHT.part01.rar) - Download _DHT.part01.rar (https://rapidshare.com/files/380452529/_DHT.part01.rar)
Download _DHT.part02.rar (http://www.filesonic.com/file/127355601/_DHT.part02.rar) - Download _DHT.part02.rar (https://rapidshare.com/files/380457344/_DHT.part02.rar)
Download _DHT.part03.rar (http://www.filesonic.com/file/129011531/_DHT.part03.rar) - Download _DHT.part03.rar (https://rapidshare.com/files/380461949/_DHT.part03.rar)
Download _DHT.part04.rar (http://www.filesonic.com/file/127312641/_DHT.part04.rar) - Download _DHT.part04.rar (https://rapidshare.com/files/380467551/_DHT.part04.rar)
Download _DHT.part05.rar (http://www.filesonic.com/file/127313591/_DHT.part05.rar) - Download _DHT.part05.rar (https://rapidshare.com/files/380486505/_DHT.part05.rar)
Download _DHT.part06.rar (http://www.filesonic.com/file/127391141/_DHT.part06.rar) - Download _DHT.part06.rar (https://rapidshare.com/files/380488333/_DHT.part06.rar)

DHT3 - Extract to x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT

Filesonic - Rapidshare
Download _DHT3.part1.rar (http://www.filesonic.com/file/127441621/_DHT3.part1.rar) - Download _DHT3.part1.rar (https://rapidshare.com/files/411914113/_DHT3.part1.rar)
Download _DHT3.part2.rar (http://www.filesonic.com/file/127435561/_DHT3.part2.rar) - Download _DHT3.part2.rar (https://rapidshare.com/files/411916327/_DHT3.part2.rar)
Download _DHT3.part3.rar (http://www.filesonic.com/file/127435611/_DHT3.part3.rar) - Download _DHT3.part3.rar (https://rapidshare.com/files/411918478/_DHT3.part3.rar)


1. Uninstall ALL previous versions, you MUST uninstall HWK Suite BEFORE trying to uninstall HWK Support Suite.
2. Install HWK Support Suite
3. Connect your UFS+HWK before running the HWK Update Client
4. Run HWK Update Client, Next, Wait ..., Start HWK update >>
5. If you have more than 1 UFS+HWK run steps 3 and 4 for each UFS+HWK.
6. Install HWK Suite.
7. Install any available minor updates in version order HWK Suite Minor vXX.XX.XXX.


How to install same HWK to 2nd PC.

Same as above and you must complete stage 4.


How to add further UFS+HWK after initial install.

1. 3 and 4 as first proceedure above.
2. If you are adding more than 1 UFS+HWK run step 1 for each UFS+HWK.
3. Run HWK Suite or HWK Suite Minor vXX.XX.XXX after initial progress bar, cancel, yes and finish.

Odia.

LuongGiaMobile™
30-03-2012, 20:00
HELLO,
ATTACHED IS THE LATEST INI FOR HWK USERS. NEW LANGUAGE DESCRIPTION FOR THE FOLLOWING MODEL ADDED:

RM-813 NOKIA ASHA 302

NEW MODELS ADDED:

RM-766 Nokia 305
RM-807 Nokia LUMIA 808
RM-808 Nokia LUMIA 900.1
RM-819 Nokia 800.2
RM-823 Nokia 900
RM-832 Nokia 203
RM-834 Nokia 202
RM-835 Nokia 610

HAVE A NICE DAY. DctxBB5.rar (http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=278409&d=1333086967)

ThanhHaMobile™
30-03-2012, 23:04
To use this file, overwrite the existing file (DCTxBB5.tip) located in either:-

x:\Program Files\Nokia\Phoenix or
x:\Program Files\SarasSoft\UFS\UFS_DCTxBB5

NOTE: This file adds updated language file info for the models listed, it does NOT add new models to the DCTxBB5 list.




Load file đính kèm copy vào đường dẫn:

x:\Program Files\Nokia\Phoenix or
x:\Program Files\SarasSoft\UFS\UFS_DCTxBB5

Để hỗ trợ thêm thông tin cập nhật tập tin ngôn ngữ cho các model sau, không thêm danh sách các model mới.


RM-813 NOKIA ASHA 302

NEW MODELS ADDED:

RM-766 Nokia 305
RM-807 Nokia LUMIA 808
RM-808 Nokia LUMIA 900.1
RM-819 Nokia 800.2
RM-823 Nokia 900
RM-832 Nokia 203
RM-834 Nokia 202
RM-835 Nokia 610




http://i118.photobucket.com/albums/o88/Thanhhamobile/Clikhe2.gif

Hùng Phát Lộc
19-08-2012, 16:29
18 august 2012 hwk ini HELLO,
ATTACHED IS THE LATEST INI FOR HWK USERS. NEW LANGUAGE DESCRIPTION FOR THE FOLLOWING MODELs ADDED:

RM-807 Nokia 808
RM-810 Nokia 111
RM-811 Nokia 111.1
RM-871 Nokia 113 NOT COMPLETE
RM-837 Nokia 112 NOT COMPLETE

HAVE A NICE DAY AND EID MUBARAK TO ALL.

Tải file đính kèm, chép theo đường dẫn C:\Program Files\Nokia\Phoenix

ThanhHaMobile™
29-03-2013, 04:08
RM-907 Nokia C1-02i
RM-872 Nokia 206/2060
RM-873 Nokia 206
RM-862 NOKIA ASHA 205/2050
RM-863 NOKIA ASHA 205
RM-864 NOKIA ASHA 205
RM-884 Nokia ASHA 302


To use this file, overwrite the existing file (DCTxBB5.tip) located in either:-

x:\Program Files\Nokia\Phoenix or
x:\Program Files\SarasSoft\UFS\UFS_DCTxBB5

NOTE: This file adds updated language file info for the models listed, it does NOT add new models to the DCTxBB5 list.


[down]

Raudua
04-08-2013, 12:26
Release Date: 22/07/2013

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


You need to uninstall old HWK Setup Suite and HWK Support Suite and use the new UFSx Support Suite.


DCTxBB5 v2.3.0.0
-----------------

1. BB5 RAPU Based Products USB Flashing / UI support added:
RM-754 (801T)
2. DCT4 INFINEON Based Products USB Flashing / UI support added:
RM-694,RM-761,RM-799,RM-800 (X2-02,200,201,201.1)

LG_GSM v2.3.0.0
-----------------

1. Infineon Egold Boot Fixed (was broken in v 2.2.0.3)
2. Infineon E500,KM553,KM555,KM555e,KM555g,KM555R added (FL,CUL)
3. Infineon GT370,GU230GO,S367 added (FL,CUL,DUL,IM)
4. Infineon T370,T375,T385,T385b,T395,T500GO,T505GO,T565,
T565b,T575 added (FL,DUL)
5. MTK: A290 added (FL,3xIM)
6. MTK: USB Support for UI Functions (Select COM on Phone)
7. WiFi MAC Address Write Added for Infineon and MTK platforms.


SAMs v2.2.0.3
--------------

SWIFT
T456-FIDO,T456-ROGERS added (UNL,SECT,IM,FL)
SWIFT-AEROFONE
[Patch MSL] fixed for DUOS Products.
E1086W,E1153i,E1182-CHN,E1195L,E1200,E1200M,E1200M-CHN,
E1200T,E1202,E1205,E1205L,E1205M-CHN,E1205T,E1207,E1207T-IND,
E1207-MEA,E1220T,E1230T,E1232B,E1232D added (PUNL,PIM,FL)
C3520,C3780,C3782,E2250,E2252 added (UNL,SECT,IM,FL)
E2220,E2222L (UNL,SECT,IM)
SWIFT-3G
C3630,C5190,C5530,E3217B,E3217L,S5270K,S5270L,S568 0
added (UNL,SECT,FL)
C5010,E3210,E3213,S5610 Direct Unlock Fixed.
IMEI Repair Added for Almost All Models:
C3630,E2310,E2313,S3710,S5270,S5610,..
INFINEON
C3310,C3310R,C3312,C3312R,C3313K,C3330,C3332,C3350 ,C3350M,
E2230L,E2350B,E2600,E2600M,S3800,S3802,S3802W,S522 0,S5220R,
S5222,S5222R,S5229,S5292,S5296 added (CUNL,PUNL,PIM,FL,UFL)
E1151 Missing boot fixed.
E1151 IMEI Rebuild and Direct Unlock added (AT Mode)
Note: Need make Boot Mode Info before use of AT Mode.
QUALCOMM
M210S,T356 Added.
BROADCOM
S5380B,S5380D,S5380F,S5380G,S5780D,S7250,S7250D added (UFL)


Many thanks to all those who have supported us!!!


Odia.


Official SarasSoft Mirrors:-

Raudua
04-08-2013, 12:27
Link http://www.mediafire.com/download/8um6t5mgmvw17o2/UFSx_Support_Suite_Setup_v02.03.00.00.exe

ThanhHaMobile™
22-08-2013, 11:22
Release Date: 21/08/2013

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

You need to uninstall old HWK Setup Suite and HWK Support Suite and use the new UFSx Support Suite.

DCTxBB5 v2.3.0.1
-----------------

1. Updated UFS Drivers Support.


LG_GSM v2.3.0.1
-----------------

1. Infineon Bug fixed (present in V 2.3.0.0)
2. Added access to UFST [PWR-R/T] Port (UART Rx,Tx)


SAMs v2.3.0.1
--------------

SWIFT-AEROFONE
C3262,S3332,S3570,S3572 added (UNL,SECT,IM,FL)
SWIFT-3G
A157 IMEI Rebuild fixed.
INFINEON
Infineon Bug fixed (present in V 2.3.0.0)
S3800W added (CUNL,PUNL,PIM,FL,UFL)
COMMON
Fixed "UFSx Devices not Found" on USB 3.0 Host Controller.


SeDBx v2.3.0.1
--------------

1. Updated UFS Drivers Support.
Many thanks to all those who have supported us!!!




http://i118.photobucket.com/albums/o88/Thanhhamobile/Anh Avatar/download_zps41eca8dc.png (http://i118.photobucket.com/albums/o88/Thanhhamobile/Anh Avatar/download_zps41eca8dc.png)

UFSx_Support_Suite_Setup_v02.03.00.02 (https://hotfile.com/dl/240799213/e9fb0e6/UFSx_Support_Suite_Setup_v02.03.00.02.exe.html)

ThanhHaMobile™
28-10-2013, 18:38
Release 28/10/2013


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

You need to uninstall old HWK Setup Suite and HWK Support Suite and use the new UFSx Support Suite.


UFS_DCTxBB5 V 2.3.0.2
----------------------

1. BB5 RAPU Based Products USB Flashing / UI support added:
RM-884 (302)
2. DCT4 INFINEON Based Products Flashing / UI support added:
RM-908,RM-924,RM-925,RM-926,RM-928,RM-929,RM-961,RM-962
(105,210,.. 210,107,106)
3. Added HiBauds (up to 3Mbaud) on UFST Box, for Infineon
XG101 and XG110 Platforms.
4. DCT4 MTK Based Products UI support added:
RM-944,RM-945 (108)
5. Windows8 64bit support.


UFS_ATRz v2.3.0.2
------------------

1. Increased Baud Rate for J220,J230
2. Windows8 64bit support.

UFS_KZF v2.3.0.2
-----------------

1. Added Windows8 64 bit Support.

UFS_RTP v2.3.0.2
----------------

1. Added Windows8 64 bit Support.

SeDBx v2.3.0.2
--------------

1. Added Windows8 64 bit Support.

LG v 2.3.0.2
------------

1. Infineon: Added HiBauds (up to 3Mbaud) on UFST Box
for EGoldVoice V2, EgoldVoice V3, XMM2150 platforms.
2. Common: Windows8 64bit support.


SAMs V 2.3.0.2
--------------

SWIFT-AEROFONE
E1260B,E1260L added (PUNL,PIM,FL)
E1265,E2262 added (UNL,SECT,IM,FL)
INFINEON
C3322i,C3590,C3592 added (CUNL,PUNL,PIM,FL,UFL)
HiBauds(3 Mbaud) added for XMM1100, XMM2150, XMM2230, XMM2250
Platforms, on UFST Box Only.
ANDROID
More Products added, UFST only, see separate Document.


Many thanks to all those who have supported us!!!

Bản cập nhật mới 2.3.03 này sau khi update và cài đặt sẽ đầy đủ tool như trước đây của 2.20, bao gồm: Acer, ATRz, DCTxBB5, KZF, LG_GSM, RTP, SAMs, SeDbx. Không biết có như cũ không, nhưng vậy cũng đỡ, một số dòng máy cổ không có nó là toi ...


Trong lúc update Box như thường lệ, nó báo lỗi gì cứ mặc nó, tự nó sẽ fix lại ok hết, mặc dù Box và tool vẫn dùng bình thường nhưng nó vẫn báo lỗi -6 hoặc lỗi 100 và HID box bad ... Ráng chờ cho tới lúc server fix lỗi cho box thành công là ok và tiếp tục check server để cài thêm những gì cần update.



http://img842.imageshack.us/img842/9412/xc5.gif



http://i118.photobucket.com/albums/o88/Thanhhamobile/Anh Avatar/download_zps41eca8dc.png

UFS_Panel_2.3.03.zip (http://www.mediafire.com/download/kcovu93cw3a6fq0/UFS_Panel_2.3.0.3.zip)

ThanhHaMobile™
21-03-2014, 17:04
Release 10//03/2014

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

You need to uninstall old HWK Setup Suite and HWK Support Suite and use the new UFSx Support Suite


http://i118.photobucket.com/albums/o88/Thanhhamobile/Anh Avatar/download_zps41eca8dc.png
UFSx_Support_Suite_Setup_v02.03.00.05.exe (http://depositfiles.com/files/5qlj1frma)

UFSx_Support_Suite_Setup_v02.03.00.05.exe (http://terafile.co/29c760406560/UFSx_Support_Suite_Setup_v02.03.00.05.exe)

ThanhHaMobile™
06-07-2014, 00:55
UFSx Update 5-7-2014


http://i118.photobucket.com/albums/o88/Thanhhamobile/Anh Avatar/download_zps41eca8dc.png (http://i118.photobucket.com/albums/o88/Thanhhamobile/Anh Avatar/download_zps41eca8dc.png)


New Panel 2306
---------------
http://support.sarunasoftware.com/he...PANEL_2306.exe (http://support.sarunasoftware.com/help files/UFS_PANEL_2306.exe)

USB Driver
----------

http://support.sarunasoftware.com/he...r_30830_W8.zip (http://support.sarunasoftware.com/help files/UFS_USB_Driver_30830_W8.zip)

V 2.3.0.4
---------
INFINEON
SM-B312E added (CUNL,PUNL,PIM,FL,UFL)
ANDROID
More Products and Features added.
UFST only, see separate Document.
COMMON
Added File Archive Path Selection.<!-- google_ad_section_end -->

ThanhHaMobile™
25-07-2014, 02:26
V 2.3.0.5 build 34
------
SPREADTRUM
SM-B310E,E1200i,E1200R,E1200Y,E1202i,E1205Q,E1205Y,E1 207Y,
E1263B,E1270,E1272,E1280,E1282T,E2200,E2200L,E2202
added (UNL,IM,BT,PCFL) for (UFST Only)

drivers
SCIUSB2SERIAL.zip on support.